LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1263 (Wiring (General Information)) >> 97 Wiring >> Wiring Harness And Connector Repairs >> Tool Descriptions >> Wiring Harness Repair Set - Wire Strippers :Vas1978/3

Wiring Harness Repair Set - Wire Strippers :Vas1978/3

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

The :VAS1978/3  is used for professional stripping and cutting of wires.

GWWN97-0018Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The :VAS1978/3  is a component of the :VAS1978B  and its previous versions.

Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping 

-- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.

-- Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.

GWWN97-0016Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open pliers again and remove the stripped wire end.

-- If necessary, cut wires using side-cutter function on the top of the wire stripper.

GWWN97-0017Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.