LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1263 (Wiring (General Information)) >> 97 Wiring >> Wiring Harness And Connector Repairs >> Tool Descriptions >> Wiring Harness Repair Set - Hot Air Blower :Vas1978/14A

Wiring Harness Repair Set - Hot Air Blower :Vas1978/14A

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

GWWN97-10492Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
CAUTION:

When heat-shrinking crimp connections, be careful not to damage any other wiring, plastic parts or insulating material with the hot nozzle of the hot air gun.

Always observe operating instructions of heat gun.

The :VAS1978/14A  is used together with the :VAS1978/15A  to heat-shrink the crimp connectors. After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.

The :VAS1978/14A  is a component of the :VAS1978B  and its previous versions.

Crimp connectors, heat-shrinking using the :VAS1978/14A  . Refer to WIRE BREAK WITH DUAL REPAIR POINT .