Crimping Pliers -.35-2.5MM :Vas1978/1A

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

The Crimping Pliers -.35-2.5mm:VAS1978/1A or the Wiring Harness Repair - Crimping Plier - Base Tool:VAS1978/1-2 together with the Wiring Harness Repair - Crimping Head -.35-2.5mm:VAS1978/1-1 , or the Wiring Harness Repair Set - Crimping Head - 4-6mm:VAS1978/2A from the wiring harness repair set is used to compress the crimp connectors.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Crimp connectors, pressing using the Crimping Pliers -.35-2.5mm:VAS1978/1A . Refer to WIRE BREAK WITH DUAL REPAIR POINT .

The following crimping heads are available for the Wiring Harness Repair - Crimping Plier - Base Tool:VAS1978/1-2

Crimping Head 0.35 mm ² - 2.5 mm ² Wiring Harness Repair - Crimping Head -.35-2.5mm:VAS1978/1-1
Crimping Head 4.0 mm ² - 6.0 mm ² Wiring Harness Repair Set - Crimping Head - 4-6mm:VAS1978/2A
Wiring Harness Repair Set - Crimping Head - JPT:VAS1978/9-1

In conjunction with Wiring Harness Repair Set - Crimping Head - JPT:VAS1978/9-1 , the crimping pliers are used to crimp contacts onto individual wires when repairing wiring cross-sections up to 0.35 mm² . Refer to 0.13 MM .

Changing the Crimping Head

-- Open crimp pliers completely.

-- Disengage both locking pins in direction of -arrows- from crimp pliers basic tool.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the required crimping head from above in direction of -arrow- in crimp pliers basic tool.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lock the crimping head by pressing in the pins in direction of -arrows- into crimp pliers basic tool.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.