Replacing The Tool Head:

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Select the appropriate tool head based on the antenna wire test. Refer to Checking The Antenna Wire: .

-- Open the handle on the pliers all the way.

-- Release and remove both locking pins in direction of -arrows- from the handle.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the necessary tool head to the handle from the top in direction of -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the pins in direction of -arrows- into the handle in order to lock the tool head into place.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.