Vehicle Diagnostic Tester, Connecting, Golf My 1998 Through 2003
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Apply the parking brake.
-- In vehicles with automatic transmission, move the selector lever to the "P" or "N" position.
-- In vehicles with manual transmissions, move the shift lever to the neutral position.
-- Remove trim -1- in direction of -arrow-.
-- With the ignition switched off, connect the Vehicle Diagnostic Tester with the Diagnostic Cable to the data link connector in direction of -arrow- in the vehicle.
-- Turn on the ignition.
-- Turn off all electrical consumers.
NOTE:
The connection of all other and the following diagnostic operation system or vehicle diagnosis and service system occurs in the previously described sequence.