B+ Cable Mount On Generator
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If the B+ wire is not tightened to specification, the following may occur:
- The battery is not completely charged.
- The complete vehicle electrical system systems/electronics may fail (disabled vehicle).
- Fire hazard due to arcing.
- Damage to electronic components and control modules caused by excessive voltage.
CAUTION:
When disconnecting and connecting the battery, always perform the work procedure as described in the service information. Refer to BATTERY, DISCONNECTING AND CONNECTING . Failure to follow the sequence can trigger the battery cut-off relay and damage the electrical equipment.
NOTE:
Generator, checking. Refer to Wiring Diagram.
-- The tightening specification for the B+ wire mounting nut -arrow- can be found in the respective generator assembly overview.