SUBFRAME, Bonded Rubber Mount In The Backward Direction Of Travel, Repairing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal.Note The Following:
Install the driveshaft. Refer to DRIVESHAFT [For transmission(s) 0C8] .
-- Install the subframe using new bolts.
-- Install the universal joint -1- on the steering gear and tighten the bolt -arrow- to the specified torque.
-- If present, bolt the heat shield -1- to the steering gear -2- -arrows-.