Upper Control Arm, Vehicles With An Air Spring Shock Absorber, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
-- Tighten the upper control arm/body threaded connection when dimension -a- between the upper control arm and body is reached.
a - 118 mm
-- Install the air spring shock absorber. Refer to AIR SPRING SHOCK ABSORBER, REMOVING AND INSTALLING .
-- Install the front wheel and tighten the bolts. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .