Air Spring Shock Absorber, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal While Noting The Following:
The air line has two markings.
Insert the air line until the front marking -arrow A- is completely covered by the union nut.
Only the second marking -arrow B- may still be visible on the air line.
-- Install the wheel and tighten. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .
-- Fill the air spring shock absorber with the Vehicle Diagnostic Tester.