LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1259 (Front Suspension) >> 40 Front Suspension >> Drive Axle >> Outer Joint, Checking >> Installing

Outer Joint, Checking: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Press in half of the total grease amount (60 grams) into joint body.

-- Insert cage with hub into joint body.

-- Note the large chamfer at the inner diameter of the ball hub and the large inner diameter of the ball cage. They must point toward the drive axle during installation.

-- Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be established again.

-- Distribute remaining grease in cover.

scientia non olet · About LEMON Manuals