LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1259 (Front Suspension) >> 40 Front Suspension >> Drive Axle >> Drive Axle, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening Specification
Drive Axle to front final drive 50 Nm  + 90°
Drive Axle to the wheel bearing
  • Use new nut.
 500 Nm 
Upper control arm to steering knuckle
  • Use new nut.
 85 Nm 
Spring shock absorber to the lower control arm
  • Use a new bolt and nut
 150 Nm  + 90°
Tie rod end to wheel bearing housing
  • Use new nut.
 90 Nm 
Upper bracket for brake line to wheel bearing housing 9 Nm 
Lower bracket for brake line to wheel bearing housing 20 Nm 
scientia non olet · About LEMON Manuals