LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1258 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Rear Lid Seal, Removing And Installing >> Installing

Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the seal is being installed again, the sealing performance and proper seating are no longer guaranteed.

For this reason, every completely removed seal must be replaced with a so-called "hammer-stroke seal".

For partially removed seals, seal flanks must be pressed together before installation.

-- Align the rear lid seal -1- with the vulcanized point -arrow- with respect to the tail lamp -arrow-.

scientia non olet · About LEMON Manuals