General Repair Information: Transmission

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Do not run the engine and do not tow the vehicle if the transmission cover is removed or if there is no transmission fluid inside the transmission.
Always clean the connection points and the area around them first, and then loosen them.
When installing transmission, make sure centering sleeves are correctly seated between engine and transmission.
Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Only use lint-free cloths!
Carefully cover or seal opened components if repairs are not performed immediately.
Only install clean components: Install replacement parts immediately after removing them from their packaging.
Do not let the engine run or tow the vehicle when the oil pan is removed or when there is no ATF in the transmission.
With the transmission removed, secure the torque converter so that it cannot fall out.
Check the ATF level. Refer to ATF LEVEL, CHECKING AND FILLING .