Bumper Cover, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Depending on the model version, slight deviations of the bumper cover must be considered when removing and installing.
Special Tools And Workshop Equipment Required
- Torque Wrench 1783 - 2-10 Nm :VAG1783
NOTE:
If the bumper cover is damaged, the lane change assistance control modules must be checked for damage.
Information regarding the lane change assistance. Refer to LANE ASSIST .