Installing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

For tightening specifications. Refer to the intake manifold assembly overview. Refer to OVERVIEW - INTAKE MANIFOLD .

NOTE:

Replace seals and sealing rings.

Hose connections and charge air system hoses must be free of oil and grease before installing.

Secure all hose connections using hose clamps appropriate for the model type. Refer to the Parts Information.

To mount the charge hoses on their connectors securely, spray the bolts on the used clamps with rust remover before installing.

-- Install the high pressure line. Refer to HIGH PRESSURE LINES, INSTALLING .