High Pressure Pump Toothed Belt, Removing And Installing: Notes
WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Wrench - Pin Type:3036
- or Counterhold - Multiple Use:T10172A
- Crankshaft Holder:3242
- Puller - Toothed Belt Pulley:T10320
- Crankshaft Socket:T40058
- Locking Pin:T40135
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Plug - TDC