Drive Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Proceed as follows:
-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING, VEHICLES WITH V6 TFSI ENGINE .
-- Secure the vibration damper with the : T10172 .
-- Loosen the bolts on the drive plate diagonally and then remove them.
-- Remove the drive plate.