Engine, Disassembling And Assembling: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Overview
NOTE:
Secure the engine to the : VAS6095 when working on the engine.
If large quantities of metal particles or abraded material are detected during engine repairs, it may mean the crankshaft or rod bearings are damaged. To prevent further damage, perform the following steps after the repair:
Clean the oil channels carefully.
Replace the oil spray jets.
Replace the engine oil cooler.
Replace the oil filter.