LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1247 (Crankshaft, Cylinder Block [CGRA]) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Main Bearing Shells Allocation >> Allocation Of Main Bearing Shells From Production Date 09/24/2012

Allocation Of Main Bearing Shells From Production Date 09/24/2012

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

It is absolutely necessary to observe the production date. The production date is located on the crankshaft counterweight. Determine the production date. Refer to MAIN BEARING SHELLS ALLOCATION .

The main bearing shells are allocated to the cylinder block and crankshaft with the correct thickness at the factory. Colored spots serve to identify the bearing thicknesses.

If the cylinder block or crankshaft are being replaced, then the bearing shells must be allocated.

The correct color code for the bearing shells needs to be determined by the letters on the cylinder block and the crankshaft.

The first letter is for crankshaft bearing 1, the second for crankshaft bearing 2, etc.

Letters on Cylinder Block 

Fig 1: Cylinder Block Identification
GWWN13-10343Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The letters for the allocation of bearing shells are located on the oil pan sealing surface.

Letters on Crankshaft Counterweight 

Fig 2: Crankshaft Identification
GWWN13-10344Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The letters for the allocation of bearing shells are located on the outer crankshaft counterweight for cylinder 1.

-- Note the letters and then match them to the color identification in the table.

Letter on the Cylinder Block Letter on the Crankshaft Counterweight Bearing Shell for Cylinder Block Color Code (upper bearing shell) Bearing Cap Bearing Shell Color Code (lower bearing shell)
A, B, C F Red Red
A, B, C E Yellow Red
A, B, C D Yellow Yellow
A, B, C C Blue Yellow
A, B, C B Blue Blue
A, B, C A Purple Blue
D, E, G F Yellow Red
D, E, G E Yellow Yellow
D, E, G D Blue Yellow
D, E, G C Blue Blue
D, E, G B Purple Blue
D, E, G A Purple Purple
H, I, K F Yellow Red
H, I, K E Yellow Yellow
H, I, K D Blue Yellow
H, I, K C Blue Blue
H, I, K B Purple Blue
H, I, K A Purple Purple
L, M F Yellow Yellow
L, M E Blue Yellow
L, M D Blue Yellow
L, M C Purple Blue
L, M B Purple Purple
L, M A Purple Purple

Example

Crankshaft Bearing 1 2 3 4 5 6 7
Letters on the cylinder block G H H H G E G
Letters on the crankshaft counterweight A B A C C A B
Bearing shell for cylinder block color code (upper bearing shell) Purple Purple Purple Blue Blue Purple Purple
Bearing cap bearing shell color code (lower bearing shell) Purple Blue Purple Blue Blue Purple Blue