LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Crankshaft, Cylinder Block [CATA]) >> 13 Crankshaft, Cylinder Block >> Engine, Disassembling And Assembling >> Ribbed Belt, Removing And Installing >> Installing >> Vehicles Without An Additional Idler Pulley:

Vehicles Without An Additional Idler Pulley:

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ribbed Belt Components
GWWA13-0866Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Generator
  2. Idler Roller
  3. Idler Roller
  4. Coolant Pump
  5. Power-steering pump
  6. A/C Compressor
  7. Ribbed belt tensioner
  8. Crankshaft

All:

After the belt is installed, always perform the following:

-- Start the engine and check the belt running.

scientia non olet · About LEMON Manuals