Overview - Drive Plate

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Drive Plate With Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Drive Plate
- Drive Plate, Removing and Installing. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
Washer
Bolt
- 30 Nm + 90° additional turn
- Replace
Washer
Sensor Wheel
- For Engine Speed Sensor -G28-
- Engine Speed Sensor -G28-, removing and installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
Crankshaft Seal, Timing Chain Side
- Removing and installing. Refer to CRANKSHAFT SEAL, TIMING CHAIN SIDE, REPLACING .
Centering Bushing for Torque Converter
NOTE:
To drive in the crankshaft, warm the crankshaft with hot air gun and cool the centering bushing with cold spray.
Alignment Sleeve