LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Crankshaft, Cylinder Block [CATA]) >> 13 Crankshaft, Cylinder Block >> Engine, Disassembling And Assembling >> Overview - Balance Shaft

Overview - Balance Shaft

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Balance Shaft With Components
GWWA13-0876Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Friction Bearing
  2. Bolt
    • 60 Nm
    • When loosening or tightening, use the Diesel Injection Pump Locking Pin:3359  as a counterhold tool.
  3. Balance Weight - Timing Chain Side
  4. Bolt
    • 9 Nm
  5. Gear Carrier
  6. Balance Weight - Belt Pulley Side
  7. Bolt
    • 60 Nm
    • When loosening or tightening, use the Diesel Injection Pump Locking Pin:3359  as a counterhold tool.
  8. Friction Bearing
  9. Balance Shaft
scientia non olet · About LEMON Manuals