LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Crankshaft, Cylinder Block [CATA]) >> 13 Crankshaft, Cylinder Block >> Engine, Disassembling And Assembling >> Lower Timing Chain Cover, Removing And Installing >> Installing >> Left Timing Chain Cover, Tightening Specifications And Sequence

Left Timing Chain Cover, Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Left Timing Chain Cover
GWWA15-11174Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten the bolts in four steps in the sequence shown.

Step Bolts Tightening Specification
1. -1- 3 Nm
2. -2- 9 Nm
3. -1- 9 Nm
4. -3- 9 Nm diagonally