LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Crankshaft, Cylinder Block [CATA]) >> 13 Crankshaft, Cylinder Block >> Engine, Disassembling And Assembling >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Removing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front/Rear Noise Insulation
GWWA10-10441Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the fasteners and remove the rear noise insulation -2-.

-- Disconnect the connector -2-.

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.

Fig 2: Identifying Engine Speed Sensor
GWWA28-10042Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals