LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Crankshaft, Cylinder Block [CATA]) >> 13 Crankshaft, Cylinder Block >> Engine, Disassembling And Assembling >> Drive Plate, Removing And Installing >> Installing

Drive Plate, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal while noting the following: 

-- Place the 1.5 mm shim on the crankshaft.

-- Install the drive plate with 3.4 mm washer.

-- Secure with new bolts.

-- Insert Counterhold - Flywheel:10-201  to loosen bolts. Tightening specification: 30 Nm + 90° (1 /4 turn) additional turn

scientia non olet · About LEMON Manuals