Overview - Timing Mechanism Drive Chain
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Mounting Pin for Drive Chain Sprocket
- Bolt
- 45 Nm
- Bolt
- 5 Nm + 90° (1 /4 turn) additional turn
- Replace
- Bolt
- 5 Nm + 90° (1 /4 turn) additional turn
- Replace
- Drive Chain Sprocket Thrust Washer
- Drive Sprocket for Left Timing Chain
- Power Take-Off Drive Chain
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to TIMING MECHANISM DRIVE CHAIN, REMOVING AND INSTALLING .
- Guide Rail
- Note location
- Bolt
- 5 Nm + 90° (1 /4 turn) additional turn
- Replace
- Bolt
- 5 Nm + 90° (1 /4 turn) additional turn
- Replace
- Mounting Bracket for Drive Sprocket
- Thrust Washer
- Drive Sprocket for Right Timing Chain
- Mounting Pin
- 12 Nm
- Insert using locking compound. For the correct locking compound. Refer to the Parts Information.
- O-Ring
- Replace
- Chain Tensioner
- Bolt
- 12 Nm
- Tensioning Rail
- Crankshaft
- With chain sprockets
- Guide Rail
- Mounting Pin
- 12 Nm
- Insert using locking compound. For the correct locking compound. Refer to the Parts Information.