LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1244 (Exhaust System, Emission Controls [CATA]) >> 26 Exhaust System, Emission Controls >> Exhaust System Components >> Selective Catalytic Reduction System >> Reducing Agent Injector -N474-, REMOVING AND INSTALLING >> Installing

Reducing Agent Injector -N474-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the Reducing Agent Injector -N474- with a new sealing washer on the reducing agent catalytic converter and make sure the tabs are positioned correctly (electric connector faces up).

-- Lay a new clamp over the connection and press it together until it locks. This secures the Reducing Agent Injector -N474-.

-- Position the bolt and tighten it to the specification -item  ) Clamp.

-- Connect the connector and the delivery line.

scientia non olet · About LEMON Manuals