Reducing Agent Catalytic Converter, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnect Exhaust System At Clamping Sleeve -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the exhaust system at the clamping sleeve -arrows-.

-- Remove the NOx Sensor 2 -G687- -item 3-.

-- Disconnect the connector -5-.

-- Loosen the clamp -arrow- and remove the Reducing Agent Injector -N474-.

-- Remove the nuts -1- and the bolts -2 and 4- and then remove the reducing agent catalytic converter.

Fig 2: Disconnect Connector -5-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.