Exhaust Gas Temperature Sensor 1 -G235-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the bolts -1-, loosen the bolt -2- and remove the turbocharger heat shield.

Fig 1: Identifying Bolts -1 To 2- And Turbocharger Heat Shield

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connector -3- from the bracket and disconnect it.

Fig 2: Installed Location for the Exhaust Cleaning System Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the wiring guide for the Exhaust Gas Temperature Sensor 1 -G235-.

-- Remove the Exhaust Gas Temperature Sensor 1 -G235- -arrow-.

Fig 3: Exhaust Gas Temperature Sensor 1 -G235- -arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.