EGR Temperature Sensor -G98-, REMOVING AND INSTALLING, CASA, CASD: Removing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the connector -1- for the EGR Temperature Sensor -G98- from the bracket, disconnect it and free up the wire.

-- Remove the EGR Temperature Sensor -G98- -item 2- using Union Nut Socket: T40055 .

Fig 1: Identifying Orange Connector -1- And EGR Temperature Sensor -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.