LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1243 (Exhaust System, Emission Controls [CGFA]) >> 26 Exhaust System, Emission Controls >> Secondary Air System >> Right Secondary Air Injection Combination Valve, Removing And Installing >> Removing

Right Secondary Air Injection Combination Valve, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, RIGHT (BANK 1) .

-- Remove the bolts -arrows- and the heat shield -1-.

Fig 1: Identifying Heat Shield Bolts
GWWA26-10847Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the vacuum line -2- from the secondary air injection combination valve.

-- Remove the bolts -3-, pull out the combination valve and remove the bolts -1- for the secondary air pipe.

Fig 2: Combination Valve Bolts & AIR Pipe Bolts
GWWA26-10436Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.