Exhaust Manifold, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications. Refer to OVERVIEW - EXHAUST MANIFOLD .
Install in reverse order of removal. Note the following:
NOTE:
Replace gasket and self-locking nuts.
Coat the stud bolts with Hot Bolt Paste:G 052 112 A3 .
-- Install the catalytic converter. Refer to CATALYTIC CONVERTERS, REMOVING AND INSTALLING .