Engine Temperature Control Temperature Sensor -G694-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Hex Ball Socket:T10058
- M8 X 50 bolt
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Seal - Engine temperature control temperature sensor
NOTE:
The Engine Temperature Control Sensor -G694- is installed between the intake manifold and the generator in the cylinder head.