Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Coat the new O-ring with coolant additive.
-- Place the Engine Temperature Control Sensor - G694- in the installation position and press it into the cylinder head with a suitable tool.
Install in reverse order of removal, Note The Following:
- Tightening specification for the Engine Temperature Control Sensor -G694- : 5 Nm.