LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1240 (Cooling System [CATA]) >> 19 Cooling System >> Coolant >> Cooling System, Checking For Leaks >> Procedure

Cooling System, Checking For Leaks: Procedure

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Risk of scalding due to hot steam and hot coolant.

  • The coolant system is under pressure when the engine is warm.
  • Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.

-- Open the coolant reservoir cap.

-- Position the Cooling System Tester:VAG1274B  with the Cooling System Tester - Adapter:VAG1274/8  on the coolant reservoir.

Fig 1: Identifying Cooling System Tester V.A.G 1274 B With Adapter V.A.G 1274/8 Installed On Coolant Expansion Tank
GWWA19-10836Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Generate approximately 1 bar (14.5 psi) pressure using the cooling system tester hand pump.

-- If pressure falls, search for leaks and correct problem.