High Temperature Circuit Coolant Pump -V467-, Removing And Installing: Installing:
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
- Tightening specification: 40 Nm
-- Fill with coolant for the high temperature coolant circuit. Refer to COOLANT, DRAINING AND FILLING, HIGH TEMPERATURE CIRCUIT .
-- Install the noise insulation. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .