LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1239 (Cooling System [CGFA]) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Thermostat, Removing And Installing >> Removing

Coolant Thermostat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant for the high temperature coolant circuit. Refer to COOLANT, DRAINING AND FILLING, HIGH TEMPERATURE CIRCUIT .

-- Remove the compressor. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the front coolant pipe. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .

NOTE:

Place a cleaning cloth underneath to catch any escaping coolant.

-- Remove the bolts -arrows-.

-- Remove the coolant thermostat with the connections.

Fig 1: Coolant Thermostat And Bolts
GWWA19-10756Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.