Coolant Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications. Refer to OVERVIEW - COOLANT PUMP/THERMOSTAT .
Install in reverse order of removal while noting the following:
-- Clean the sealing surfaces; they must be free of oil and grease.
-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Install the left front coolant pipes. Refer to COOLANT PIPES FOR LOW TEMPERATURE COOLANT CIRCUIT, REMOVING AND INSTALLING .
-- Fill with coolant for the high temperature coolant circuit. Refer to COOLANT, DRAINING AND FILLING, HIGH TEMPERATURE CIRCUIT .