Separating

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cap -1- . Remove the three nuts for the torque converter -arrow- through the opening in the transmission. To do so, turn the input shaft an additional 120°.

Fig 1: Cap And Torque Converter Bolts

-- Support the electro-drive drive motor using the Shop Crane:VAS6100 as shown.

Fig 2: Identifying Electro-Drive Drive Motor

-- Remove the bolts -1 through 10- connecting the transmission to the electro-drive drive motor.

Fig 3: Bolt Tightening Sequence

-- Remove the electro-drive drive motor using the Shop Crane:VAS6100 .

-- To prevent it from falling, secure the torque converter in the transmission using the Bracket - Multiple Use:30-211A .

Fig 4: Identifying Bracket -30-211A- Attached To Secure Torque Converter