LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1234 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Bench Seats, Removing And Installing >> Installing

Bench Seats, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The five mounting grommets are damaged during bench seat removal and need to be replaced.

-- Remove the 5 mounting grommets from the seat frames.

-- Insert the new mounting grommets until they engage audibly in the seat frames.

-- Attach the bench seats in the rear area via the wire brackets.

-- Connect any connectors according to the vehicle equipment.

-- Engage the bench seats in the mounting grommets of the seat frames via the front wire brackets.

scientia non olet · About LEMON Manuals