Seat Height Adjustment Motor Assembly Overview

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Height Adjustment Motor Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Seat Pan
Screws
- 10 Nm
- Quantity: 2
- Self-locking
- Always replace if removed
- Threaded holes for screws must always be cleaned, for example, with thread cutter
Bracket
- Bolted with the seat pan
Seat Height Adjustment Motor
- Driver side: Driver Seat Height Adjustment Motor -V245-
- Front passenger side: Front Passenger Seat Height Adjustment Motor -V246-
- Removing and installing. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
Bolt
- 18 Nm
  CAUTION:
  The bolt has a left-hand thread.
- Self-locking
- Always replace if removed
- Removing and Installing. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- Threaded holes for screws must always be cleaned, for example, with thread cutter
Adjusting Spindle
- Pre-adjusted by the manufacturer
- Component of the seat height adjustment motor
Screws
- 28 Nm
- Quantity: 2
- Self-locking
- Always replace if removed
- Threaded holes for screws must always be cleaned, for example, with thread cutter