Installing The Right Seat
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the backrest on the seat.
WARNING:
The bolts may only be used once. Therefore, use new bolts during installation.
-- Tighten the bolts -1-, -2-, -3- and -4- by hand.
-- Bolt the backrest to the seat in the installation sequence -2-, -3-, -4- and -1-. Tightening specification: (33 ± 3.0 Nm ).