Backrest Adjustment Motor Assembly Overview
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The backrest is shown without the cushion, cover and lower seat frame.
- Backrest Frame
- Nut
- 6 Nm
- Replace
- Washer
- Shaft
- The threads must be cleaned before installing the nut -item 2- (for example, using a thread tap).
- Coat the threads on the shaft with locking fluid before installing the nut. For the correct locking fluid, refer to the Parts Information.
- Bolt
- 7.5 Nm
- Replace
- Use locking fluid when installing the bolt. For the correct locking fluid, refer to the Parts Information..
- Backrest Adjustment Motor
- Driver side: Driver Backrest Adjustment Motor -V45-
- Front passenger side Front Passenger Backrest Adjustment Motor -V46-
- Removing and installing. Refer to BACKREST ADJUSTMENT MOTOR, REMOVING AND INSTALLING .