LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1231 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Passenger Occupant Detection System For Front Passenger Airbag Deactivation >> Seat Position Sensor, Removing And Installing >> Notes

Seat Position Sensor, Removing And Installing: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

The seat position sensor is a component of the wiring harness to the Passenger Occupant Detection System Control Module -J706-, whose connectors must not be disconnected. To replace the seat position sensor, the electrical wires to the seat position sensor must be disconnected and the new seat position sensor must be connected with crimp connectors.

scientia non olet · About LEMON Manuals