Required Importer Notification
Not for North American Market
The labels (tear-off strips) on the new components must be affixed to "registration tag 2 for airbag systems" after installing the "passenger occupant detection system repair kit" and/or the seat belt force sensor. "Registration tag 2 for airbag systems" should be sent to importer for registration.
The "registration tag 2 for airbag systems" can be copied from the "Technical Service Handbook" :
ElsaWin
→ Technical Service Handbook
→ Technical Product Information
→ Passenger protection
→ Operation, activation
→ Functionality
→ Front passenger airbag switch off
→ Switching off the airbag units/ child seat, seat installation, etc. (2022327/2)
→ System 2
The "process ID" and "TPI number" for this procedure can be found in "Technical Service Handbook 2" : "2022327/2".