Cruise Control System, Activating And Deactivating
WARNING: This page is about a different car, the 2017 Volkswagen Touareg and 2010 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
General Description
Cruise control system functions are controlled by the engine control module.
-- The cruise control system can be activated/deactivated. Refer to CRUISE CONTROL SYSTEM, ACTIVATING AND DEACTIVATING .
DTC Recognition and Display
Malfunctions in relation to the cruise control system are sent via the engine control module.
Use the Vehicle Diagnostic Tester in the "Guided Fault Finding" mode for fault finding.
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .
-- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".
-- Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence:
- Powertrain
- Engine code
- 01 - On Board Diagnostic (OBD) capable systems
- Engine management system or Diesel Direct Injection & Glow Plug System
- Functions
- Cruise Control System, Activating and Deactivating