Solar Panel - 10 Panels:Vas6102B Maintenance Charging

WARNING: This page is about a different car, the 2017 Volkswagen Touareg and 2010 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Solar Panel - 10 Panels:VAS6102B

General Description

The :VAS6102B supports the vehicle electrical system and prevents the battery from self-discharging.

The :VAS6102B reaches a maximum voltage of 14.3 V and a maximum charge current of 255 mA.

All chargeable lead- or lead gel batteries can be charged with the :VAS6102B .

The :VAS6102B is connected to the data link connector in the vehicle.

There is a green LED inside the frame, which displays the function. The brighter the LED, the higher the charging current.

It is not possible to overcharge the battery due to the integrated electronics.

-- Secure the :VAS6102B to the interior rearview mirror -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lay the bottom on the instrument panel -2-.

NOTE:

The :VAS6102B must not touch the instrument panel completely. Only the bottom edge may be used for support. If it touches completely, the color of the instrument panel could change.

-- Pull the securing string together so that the :VAS6102B is close to the glass.

-- Connect the :VAS6102B to the vehicle data link connector. Connecting is the same as with the Vehicle Diagnostic Tester. Refer to Vehicle Diagnostic Tester, CONNECTING .

-- Check the :VAS6102B function. The green LED shows the functionality of the :VAS6102B .