Version 1

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coupling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with right and left release buttons -arrows-.

Opening

It is necessary to counterhold the fuel coupling point -1-.

Fig 2: Identifying Lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the :T10468 between the heat shield and the fuel line stop -arrow- -2- and counterhold it.

Continue for all coupling points on the fuel system

Fig 3: Identifying Coupling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the connector coupling -1- in the direction of the -arrow A-.

-- Press the release buttons -arrows- and disconnect the connector coupling -1- in the direction of -arrow B- from the fuel line -2-.

Note the color coding when installing. Refer to CONNECTOR COUPLINGS, DISCONNECTING .

-- Pull on the connector coupling to check for secure fit.