LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1227 (Steering) >> 48 Steering >> Power Steering >> Power Steering, Removing And Installing >> Installing >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening Specification
Union Screw, Pressure/Return Line To The Steering Gear 32 Nm 
Universal Joint To Steering Gear
  • Use a new bolt
 20 Nm  + 90°
Heat Shield To Right Steering Gear (If Present) 9 Nm 
Heat Shield To Steering Gear/Universal Joint 9 Nm 
Tie Rod To Steering Knuckle
  • Use new nut
 90 Nm 
Tie Rod To Steering Gear 100 Nm 
Steering Gear To Subframe
  • Always use new nuts and bolts.
 90 Nm  + 90°
Hydraulic Line Brackets To Steering Gear 9 Nm 
scientia non olet · About LEMON Manuals