LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1227 (Steering) >> 48 Steering >> Power Steering Assembly Overview, RHD >> Power Steering Gear, Removing And Installing, RHD >> Installing >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening specification
Pressure-/Return Line To Steering Gear 32 Nm 
Clamps To Steering Gear 9 Nm 
Universal Joint To Steering Gear
  • Use new bolt.
 20 Nm  + 90°
Heat Shield To Steering Gear 9 Nm 
Tie Rod To Steering Knuckle
  • Use new nut.
 90 Nm 
Steering Gear To Subframe
  • Always use new nuts and bolts.
 90 Nm  + 90°
Front final drive to subframe
  • Always Use New Nuts And Bolts.
 90 Nm  + 90°
Subframe to body
  • Use new bolts.
 120 Nm  +180°
scientia non olet · About LEMON Manuals